LAMPWORKING KILN

Model P-9 Lampworking kiln designed by AIM KILNS and disrtibuted by JPS KILNS knowing the needs of the artist. The model P-9 is one of the most popular on the market for its functionality and compact size, created to meet the needs of the artist behind the torch. It runs on 120v outlet which makes it affordable for any workshop, If you work on small and medium projects, the model P-9 is one of the kilns design to carry them out.

The P-9 is one of our smallest lamp working models in our Professional Kiln series. Weighing in at just under 90 pounds, it’s small enough to move or transport but large enough for an artist to have plenty of space for multi sectional pieces or multiple small- medium pieces or vessels. Like a majority of the models in our Professional Series, it is equipped with (5) five doors to maximize versatility and function that today’s artists require. The P-9 replaces a recently discontinued 99LS/D model that was a staple in the industry for nearly three decades. With roughly the same interior size and similar cosmetic appearance, the newer and much more revised version is a night and day comparison. After three long years of rigorous engineering, testing and feedback from multiple artists, countless hours perfecting the new door design, and we are finally confident that we have released what is hands down the most technical lamp working kiln in the industry.

The P-9 was designed for bead making, lamp working, and other various glass work with a maximum operating temperature of 1400 degrees fahrenheit. Available in 120, 208, 240 volt power source. 

This model offers a 2 year electrical and lifetime craftsmanship warranty

Features:

• All new main door design incorporating five individual fully adjustable doors that offer a variety of versatility and options to make accessibility simple and highly functional.
• 10 degree angle in the main chamber face that helps produce even heat throughout the interior chamber. This angled chamber cut also provides even wear and a tight door seal on every unit.
• 304 stainless steel used in the bead doors to handle temperature in high heat areas.
• Fully adjustable pressure assisted door design allowing all doors to firmly stay open or in any position. *patent pending*
• Our Profession Series kilns do NOT use any fiber board insulation in the lids, main doors, or bead doors as fiber board is an inadequate source of insulation and a major source of heat leakage and shrinkage when used as a sole insulator in annealing kilns.
• Door gapping has been minimized to provide maximum efficiency, without sacrificing function.
• Perfectly balanced main door and counterweight with new compact counterweight design allowing this model to fit into tighter spaces in a studio or workshop. Full adjustability to offer the perfect tension when opening/ closing main door.
• Precise heating element placement in the chamber in combination with the 10 degree chamber angle help focus heat near the lower front portion of the floor to focus the heat where you need it and keep your work stable while accessing lower doors.
• Extremely quick heat up time in this model, taking approximately 20-25 minutes to reach 1000F+ in most cases.
• Well placed thermocouple providing extremely accurate temperature throughout the chamber.
• Simple and precise electrical system making troubleshooting and offsite repairs much more simplified for customers.
• Meticulous and unrivaled brick and mortar work in each and every lamp working kiln.
• Detailed quality control process and 3-point inspection before product leaves our factory.
• Each metal component or piece of hardware such as handles, hinges, arms, etc. is all custom designed and manufactured in house by Aim Manufacturing. No low quality off the shelf hardware parts used on our product which is one of the biggest differences that separates us from other manufacturers.
• New slotting design in the lower frame and wire pan areas to allow for more airflow to keep electronic components much cooler to extend their lifespan.
• This model is pre- fabricated and set up for accessories such as rod rests, upgraded relays, modified hinges, and other modifications than can be added at time of purchase or easily added later.
• High temperature primer, metallic stove paints, and high quality powder coatings used exclusively.
• Wood or high temperature anabolic handles used to keep exterior handles cool to the touch while giving the kiln a pleasing aesthetic exterior appearance.
• We offer a wide range of programmable digital controllers that were actually designed for lamp working to meet your individual needs.